Product

Aquafilter Big Blue 20" Water Filter Housing with Accessories (FH20B1-WB) 

This is the industry standard for central (inlet) water filtration systems, which is ideal for both private homes and commercial facilities.

Aquafilter FH20B1-WB is a high-quality, 20-inch Big Blue (BB 20) type filter housing (flask), which is installed on the central water inlet main. It is designed to filter large volumes of water and reliably protects household appliances, heating systems, pipes and plumbing from scale, rust, sand and other mechanical impurities.

The housing is made of high-strength, impact-resistant polypropylene, which ensures its long-term and safe operation even under high-pressure conditions.

Key advantages:

High throughput: The Big Blue 20" format is specially designed to provide maximum water flow without significant pressure drop. Ideal for large homes and commercial spaces.

Multifunctionality: The flask can accommodate any standard BB 20" cartridge — both mechanical (thread, polypropylene), and activated carbon, anti-limescale or iron softening filters.

Full set (with accessories): The model comes with a solid metal mounting plate (for wall mounting), a special key for easy opening and closing of the flask, and a pressure gauge (installing a gauge helps you easily determine when the cartridge needs to be cleaned/replaced based on the pressure drop).

Double guarantee of tightness: The housing has improved protection and is equipped with a rubber double sealing ring (O-ring), which eliminates the risk of water leakage.

Pressure relief valve: There is a red button (air release) on the top of the housing, which greatly simplifies the process of replacing the cartridge due to the preliminary release of pressure.

Technical Features:

Model: FH20B1-WB

Type: Big Blue 20" (standard BB20)

Inlet / Outlet Thread: 1" BSP (female thread, with copper inserts for durability)

Maximum Working Pressure: 6 bar

Working Temperature: 2°C – 45°C (for cold water only)

Body Material: High Density Polypropylene (FDA certified food grade plastic)

Dimensions (Height x Diameter): Approx. 605 mm x 185 mm

Aquafilter 10" (two-piece) is a reliable mains filter housing that is installed on the cold water inlet pipe. It is specially designed for effective filtration of mechanical impurities - sand, rust, clay, silt and other suspended particles.

This model is distinguished by its two-piece construction (cap and flask), which ensures maximum tightness, durability and easy cartridge replacement.

The kit includes everything you need to install and start working - including the primary cartridge!

Key advantages:

Complete set: You no longer have to look for accessories separately. The kit includes a wall bracket (hanger), a special key (wrench) for removing the flask and a primary mechanical filtration cartridge.

Protection of household appliances: Ideal for installation in front of washing machines, dishwashers and heating boilers (central heating) to prevent their damage by sand and debris.

Copper screw (1" IN/OUT): The inlet and outlet ports are reinforced with metal (copper) inserts, which eliminates screw breakage during installation and ensures a reliable connection.

Ergonomic design: Thanks to its compact size, it can easily fit even in narrow spaces (for example, in cabinets or plumbing shafts).

Technical characteristics (capacity and parameters):

Type: Slim 10" (standard 10-inch flask)

Inlet/outlet screw: 1" (with copper insert)

Performance (throughput/capacity): approximately 20 - 30 liters per minute (depending on the inlet pressure and cartridge). This capacity is quite sufficient for standard consumption in one apartment or small house.

Maximum working pressure: 6 bar (bar).

Operating temperature: 2°C – 45°C (for cold water only).

Body type: Two-piece (Head + Housing), equipped with a pressure relief valve (red button on the head) for easy air release when changing the cartridge.

The kit includes:

Filter body (flask) with 10" (1" screw)

Plastic solid hanger (wall bracket)

Sapphire wrench (wrench) for removing the cartridge

Primary cartridge for mechanical cleaning (Sediment)

Rubber sealing ring (O-ring) for safety

Aquasystem VRV 60LT is a premium floor-standing expansion tank (membrane vessel), designed for powerful, closed-type central heating and air conditioning systems. Its main purpose is to compensate for pressure fluctuations caused by thermal expansion of water. It protects the system from hydraulic shocks and overpressure, thereby ensuring smooth and safe operation of the boiler.

The model is equipped with special support legs, which allow you to easily and firmly install it on the floor, without additional load on the wall.

Main advantages:

100% Italian premium production: Aquasystem products are a world leader in the field of plumbing and heating, which is due to the highest quality welding seams and strict control of European standards (CE).

Convenient installation design (VRV): solid metal legs ensure ideal stability of the tank on the floor. This eliminates the risk of falling off the wall, which is critically important for a 60-liter (full of water) tank.

Long-lasting operation: Inside the tank is a high-quality, heat-resistant rubber membrane (EPDM), which completely eliminates water contact with the metal walls of the tank, thereby preventing corrosion and rust.

High working pressure (8 bar): provides a large safety margin even in large and complex heating circuits.

Technical specifications (capacity and parameters):

Brand: Aquasystem (manufacturer: Italy)

Model: VRV 60

Volume: 60 liters (designed for large houses and powerful systems)

Maximum working pressure: 8 bar (bar)

Factory initial pressure (in the air chamber): 1.5 bar

Working temperature: from -10°C to +99°C (specialized for heating systems)

Connecting screw size: 1" (one inch, external screw - provides high water permeability)

Membrane type: EPDM (ultra-elastic and durable rubber)

Installation type: vertical, floor-standing (supports with legs)

Housing material: high-strength carbon steel with anti-corrosion powder coating.

Aquafilter 10" (two-piece) is a compact and efficient mains filter that is installed on the cold water inlet pipe. It reliably traps mechanical impurities - sand, rust, clay, sediment and silt, thereby protecting your plumbing, taps and expensive household appliances (washing machine, dishwasher, heating boiler) from premature damage.

The two-piece body (head and flask) provides maximum strength and eliminates water leakage, and the accessories included in the kit make the product immediately ready for installation.

 Main advantages:

Optimal screw size (3/4"): The 3/4-inch screw, reinforced with copper inserts, fits perfectly into standard household plumbing pipes, which simplifies installation and reduces the need for additional adapters.

Complete set: The set includes everything you need — a wall-mounted hanger, a special wrench for easy removal of the flask, and a primary cartridge for mechanical cleaning.

High-quality materials: The housing is made of high-strength materials that fully comply with safety standards for contact with drinking water.

Compactness: Easily installed in confined spaces (in shafts, cabinets, on the wall).

 Technical specifications (capacity and parameters):

Type: Slim 10" (standard 10-inch flask)

Inlet/outlet screw: 3/4" (with copper insert)

Performance (throughput/capacity): approximately 15 - 25 liters per minute (performance is slightly less than the 1" model due to the diameter of the screw, but it is quite sufficient for uninterrupted use of one apartment or house).

Maximum working pressure: 6 bar (bar).

Working temperature: 2°C - 45°C (for cold water only).

Construction: Two-part (Head + Housing), pressure relief valve is located on the top (red button for releasing air when replacing the cartridge).

 The kit includes:

Filter flask 10" (3/4" with screw)

Plastic solid hanger (wall bracket)

Sapphire key (wrench) for removing the cartridge

Primary cartridge for mechanical cleaning (Sediment)

Rubber sealing ring (O-ring) for tightness

BPH 120/340 65 T 1275w 10.9mX46m3/h DN65/PN10 circulation pump DAB

BPH 150/340 65 T 2800w 14.9mX52m3/h DN65/PN10 circulation pump DAB

Aquafilter 5" is a small, high-quality mains filter, specially designed for installation in confined spaces. This model is an ideal solution for individual protection of specific household appliances - washing machine, dishwasher, gas heater (boiler) or heating boiler from mechanical impurities (sand, rust, clay, sediment).

This model is distinguished by its unique three-piece design (flask, cap and retaining screw ring). This design significantly simplifies filter maintenance and practically eliminates the risk of leakage when replacing the cartridge.

Main advantages:

Ultra-compact size (5 inches): takes up minimal space. Easily fits in narrow shafts, behind bathroom cabinets, in kitchen cabinets or directly at the point of connection of equipment.

Advantages of the three-piece (3-Piece) design: when replacing the cartridge, the flask itself does not rotate and the rubber seal (O-ring) does not Damaged by friction. Only the retaining ring (wrench) rotates, which ensures ideal tightness and much longer operation.

Copper screw (1/2" IN/OUT): The 1/2-inch screw is the most popular standard for connecting household appliances and faucets in Georgia. Copper inserts protect the screw from being cut and damaged.

Transparent body: Allows you to visually monitor the level of contamination of the cartridge and replace it in a timely manner without opening the flask.

Technical specifications (capacity and parameters):

Type: Slim 5" (height approx. 19 cm)

Type of construction: Three-piece (cap, flask, connecting collar)

Inlet/outlet screw: 1/2" (with copper insert)

Performance (throughput/capacity): approx. 10 - 15 liters per minute (this capacity is ideal for continuous water supply of individual appliances or one specific tap).

Maximum working pressure: 6 bar (bar).

Working temperature: 2°C - 45°C (designed for cold water only).

Air release valve: The valve located on the top of the body makes it easy to depressurize before changing the cartridge.

Package Contents:

5-inch three-piece body (with 1/2" screw)

Rubber O-ring

(Note: Cartridge, wall mount and removable key are not included and are available separately if needed).

BPH 180/340 65 T 2760w 17.9mX53m3/h DN65/PN10 circulation pump DAB

Aquafilter 5" is a small, premium-quality mains filter, specially designed to purify water from mechanical impurities (sand, rust, clay, sediment). It is an ideal solution in cases where installation space is strictly limited, but you want reliable primary filtration of mains water.

The model is distinguished by its innovative three-part design (flask, cap and retaining screw ring). This design significantly simplifies cartridge replacement and ensures ideal tightness over many years of operation.

Key advantages:

Optimal screw (3/4" IN/OUT): The 3/4-inch screw, reinforced with copper inserts, is directly compatible with the internal wiring standard of most apartments, which makes installation easy and eliminates unnecessary adapters.

3-Piece Technology: When changing the cartridge, the rubber O-ring is not damaged by friction, as only the outer retaining collar (ring) rotates, not the flask itself. This significantly reduces the risk of leakage.

Ergonomic and compact: With a height of just 19 cm, the filter can easily fit into any narrow space, in manifold cabinets (tap nodes) or plumbing shafts.

Transparent housing: Visually, without removing the flask, you can easily monitor the cartridge's contamination level and see when it is time to replace it.

Technical specifications (capacity and parameters):

Type: Slim 5"

Type of construction: three-piece (cap, flask, retaining ring)

Inlet/outlet screw: 3/4" (with copper insert)

Performance (flow rate/capacity): approximately 12 - 18 liters per minute (despite the compact size, thanks to the 3/4" screw, it provides stable water flow for uninterrupted use in a small apartment).

Maximum working pressure: 6 bar (bar).

Working temperature: 2°C - 45°C (designed for cold water only).

Air release valve: red button on top, which releases pressure in the flask and makes it easier to change the cartridge.

Complete set:

5-inch three-piece flask (3/4" with screw)

Rubber sealing ring (O-ring)

(Note: Cartridge, wall mount and removable key are not included in the kit and are assembled separately if necessary).

BPH 120/280 50 M 870w 11.3mX30.4m3/h DN50/PN10 circulation pump DAB

Aquafilter 5" (three-piece) is a premium-class mains filter housing designed to clean cold water from mechanical impurities (sand, rust, clay, sediment). This model is an ideal solution when installation space is strictly limited (e.g. in collector cabinets, narrow plumbing shafts), but you want reliable primary filtration of mains water.

The kit includes a wall bracket and a removable wrench, which simplifies the installation and subsequent maintenance process as much as possible.

Key advantages:

Ready-to-install kit: includes a reliable wall bracket for stable fixation of the filter and a branded wrench for easy and quick cartridge replacement.

Three-piece (3-Piece) technology: innovative design (flask, cap and external retaining ring). When replacing the cartridge, the rubber protective ring (O-ring) is not damaged Friction-free, as only the outer retaining collar rotates. This virtually eliminates the risk of water leakage.

Optimal screw (3/4" IN/OUT): The 3/4-inch screw, reinforced with copper inserts, perfectly fits the most common household pipe standards in Georgia, eliminating unnecessary adapters.

Transparent housing: Allows you to visually monitor the level of contamination of the internal cartridge without removing the flask.

Technical specifications (capacity and parameters):

Type: Slim 5" (height approx. 19 cm)

Type of construction: Three-piece (cap, flask, retaining ring)

Inlet/outlet screw: 3/4" (with copper insert)

Performance (flow rate/capacity): approx. 12 - 18 liters per minute (ensures stable water flow for uninterrupted use of a small apartment without noticeable pressure drops).

Maximum working pressure: 6 bar (bar).

Working temperature: 2°C - 45°C (designed for cold water only).

Pressure relief valve: Red button on top, which releases pressure in the flask and makes it easy to change the cartridge.

The kit includes:

5-inch three-piece flask (with 3/4" screw)

Plastic wall bracket and bolts

Sapphire wrench for removing the flask

Rubber O-ring

(Note: Cartridge is not included in the kit and must be selected individually, depending on your needs).

BPH 150/360 80 T 2710w 15.3mX86m3/h DN80/PN10 circulation pump DAB